Knowledge Base — H-Town Pallet Racking
Blog & Resources
Practical racking guides for warehouses across Fort Bend, Brazoria, Galveston, Harris, Chambers and Montgomery counties, from the bay shore to The Woodlands.
Latest articles
Guides for H-Town warehouses
Coastal Pallet Racking on Galveston Bay
Salt air, humidity and storm surge are hard on steel. How to zone a bay-shore building by finish, when galvanizing earns its cost, and what to check before and after a storm.
September 2026 — Read ArticlePort Freeport and Brazoria County Racking
Bagged resin, container transload and plant maintenance stores each ask something different of rack. Plus how Freeport and Alvin differ, and who reviews the permit.
September 2026 — Read ArticleFort Bend Racking Permits: City or County?
Sugar Land, Missouri City, Richmond and Fulshear review rack inside their limits. Outside them, the Fort Bend County Fire Code applies, with a 500 sq ft high-piled permit renewed every year.
September 2026 — Read ArticleResin Racking in Channelview and Mont Belvieu
Group A plastics drop the high-piled trigger to 6 feet. How commodity class shapes rack height, flues and aisles, and which office reviews the work east of Houston.
September 2026 — Read ArticleWarehouse Racking in The Woodlands and Magnolia
The Woodlands is a township, not a city, and much of the Magnolia area is outside city limits. What that means for rack permits, and layouts that suit flex space and yards.
September 2026 — Read ArticleRacking Permit Checklist for the Houston Area
Jurisdiction, commodity, slab, layout, Texas-sealed drawings, parallel reviews, inspection and renewal: the permit steps in the order that avoids rework.
September 2026 — Read ArticleOSHA and Pallet Rack: A Texas Warehouse Guide
There is no rack-specific OSHA rule. What 29 CFR 1910.176 and the General Duty Clause actually cover, how MH16.1 fills the gap, and the records to keep on file.
September 2026 — Read ArticleCooler and Freezer Racking in the Houston Area
Steel toughness in the cold, condensation at the dock, freezer slabs, sprinklers and installing in a running cold room, all in Gulf Coast heat.
September 2026 — Read ArticleInspecting Used Rack From Gulf Coast Buildings
Used rack carries its building’s history. How to check base plates, flood exposure and slab movement damage before you buy a lot.
September 2026 — Read ArticleDamaged Rack: Repair It or Replace It?
Triage the damage, know when a repair kit works and when only a new frame will do, and why a moving slab or coastal corrosion changes the answer.
September 2026 — Read ArticleRack Load Ratings and Placards, Explained
Beam, frame and floor each set a limit and the lowest one wins. How capacity quietly drops, and what a proper load plaque should show.
September 2026 — Read ArticleAisle Width and Rack Layout Planning
Truck turning space, clear height, sprinkler clearance and floor flatness decide your aisle width, and aisle width decides your pallet count.
September 2026 — Read Article12 Warning Signs Your Pallet Rack Needs Attention
Bent columns, missing locks, leaning rows, overloaded bays and rust at the base plate. What to look for and what to do when you find it.
September 2026 — Read ArticleChoosing a Pallet Racking System: 6 Questions
SKU count, rotation, throughput, loads, building and equipment. Answer these six and the right rack system usually picks itself.
September 2026 — Read ArticleThe 5 Main Pallet Rack Types Compared
Selective, drive-in, push-back, pallet flow and cantilever side by side, with filters for rotation, height and SKU count.
September 2026 — Read ArticleA Buyer’s Guide to Used Pallet Racking
Match the system, inspect the steel, count the missing parts, ask for the paperwork and compare total cost before buying used rack.
September 2026 — Read ArticleMoving Pallet Racking to a New Building
Decide what is worth moving, document it, tear down without damage, re-engineer for the new slab and permit it again at the new address.
September 2026 — Read ArticleHelpful resources
Standards and agencies
ANSI/RMI MH16.1
The national standard for designing, testing and using industrial steel storage racks, published by the Rack Manufacturers Institute.
OSHA Warehousing
Federal OSHA guidance for warehouse employers, including storage, powered trucks and material handling.
Texas Engineering License Lookup
Rack drawings filed in Texas need a Texas engineer’s seal. Check a license with the Texas Board of Professional Engineers and Land Surveyors.
OSHCON Safety Consultation
A free, confidential workplace safety consultation program for Texas employers, run by the Texas Department of Insurance.
Talk to Our Team
Questions about a building, a permit or a used lot? Send us the details and we will get back to you with a free estimate.
Ready when you are